Glazing resin Gédéo 150ml

Epoxy resin for creating transparent glass-like castings, highly transparent and solid when dry. The glazing resin is mainly used to form thin layers. It can be used on glass, ceramics, metal, silicone, painted wood, plastic, etc. Store in an airtight container at temperatures up to 25 °C. Drying time approx. 24 hours, cleaning with soapy water.

The epoxy resin kit contains:

• resin and hardener, total 150ml
• 2 scoops
• 2 palette knive for mixing

BRIEF INSTRUCTIONS FOR USE:
Mix the hardener and resin in a container (1 part hardener and 2 parts resin) and mix thoroughly in the corners of the container (pay attention to the ratio of the ingredients, if there is more than 1 part hardener, the casting will remain soft). Stir gently and slowly, moving quickly to form bubbles. We can add colour with Vitrail glass paints. Pour the finished mixture into the mould (it is better to grease it with Vaseline beforehand), into the bed, on the photo, etc. After about 12 hours the cast can be removed from the mould. The product can also be decorated with Vitrail glass paints.

ATTENTION:

The hardener irritates the respiratory organs. It is harmful in contact with skin and if swallowed. Causes frostbite. Wear suitable protective clothing, gloves and goggles or face shield. In case of injury, if you feel unwell or if swallowed, seek medical attention immediately and show this container or label.

The resin is hazardous to the environment. Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. May cause sensitisation by skin contact. Irritating to the eyes and skin. Wear suitable protective gloves. If swallowed, seek medical attention immediately and show this container or label.

Didn't find the answer to your question about this product here? Do not hesitate to contact us and we will be happy to answer your question.